May 21, 2014

★★ N9005XXUEND3 Android 4.4.2 KitKat Firmware for Galaxy Note 3 SM-N9005 (TNZ)★★

Galaxy Note 3 SM-N9005 အတြက္ Android 4.4.2 KitKat Firmware (New zealand) ကုိတင္ေပး
လိုက္ပါတယ္။အင္စေတာလုပ္နည္းအဆင့္ဆင့္ေသခ်ာဖတ္ျပီးလုပ္ေဆာင္သြားပါ။Firmware Version Info
(PDA: N9005XXUEND3 CSC: N9005TNZENC2 MODEM: N9005XXUENC2 CHANGELIST: 1168347 BUILD DATE: 14.04.2014)




1- Check battery percentage, your device should have at least 60% battery power
2- Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
3- Backup important data and settings to external storage.
4- Install USB driver for your device on your computer- Download Samsung USB Driver


  1. Download Android 4.4.2 XXUEND3 Firmware for Galaxy Note 3 N9005 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 N9005 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N9005 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: N9005XXDLJ5_N9005ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish

က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္  ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။
 

Thank You For Downloading And Dont Forget to Clicking Once on a Ad Banner.
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို  ကလစ္ခဲ့ပါခင္ဗ်ာ။




★★နည္းပညာၿမိဳ႕ေတာ္★★

No comments:

Post a Comment

Followers