Galaxy S4 GT-I9515 (Value Edition) အတြက္ Android 4.4.2 KitKat Firmware ကိုတင္ေပးလိုက္
ပါတယ္။ဘယ္လိုလုပ္ေဆာင္ရမလည္းဆိုတာကိုေအာက္အဆင့္ဆင့္ေသခ်ာၾကည့္ျပီးလုပ္ေဆာင္သြားပါ။
Important Note:
"The firmware is released only for the Samsung Galaxy S4 GT-I9515 model, so don't try this in any other android device.
Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage
Install USB driver for your device on your computer
1- Download Android 4.4.2 XXU1ANC1 Firmware for Galaxy S4 I9515 from the above list
2- Download Odin 3.09
3- Switch off your phone and boot Galaxy S4 I9515 into Download Mode by pressing and holding the
Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to
Download Mode.
4- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator
(Right click on the .exe file and click on Run as administrator)
5- Now connect your Galaxy S4 I9515 to your computer via USB cable
6- In Odin3 screen, you should see a COM Port number like :[COM7] at ID:COM section and Added! text at the message box.
This means your device has been detected by Odin3.
7- Make sure that, only the Auto Reboot and F. Reset Time options are checked.
8- Now, extract the downloaded firmware zip file, you find a firmware file with extension .tar.md5
9- In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension
(The firmware file look something like: I9515XXDLJ5_I9515ODDDLI7_INU.tar.md5)
10- Now, click on the Start button to begin the installation process, wait few moments.
11- Once completed, you would see PASS! message in ID:COM port having green background
12- Your phone should automatically reboot after completion
13- You can now disconnect your phone from computer
14- Finish
Congratulations! your Galaxy S4 I9515 is now updated to the latest and official Android 4.4.2 KitKat firmware. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial,then your your Galaxy S4 should now running on the latest Android 4.4.2 KitKat build version XXU1ANC1. You can confirm the firmware update details from Settings-About Phone. If you find any problem with the above tutorial and download link, feel free to contact with us using the comment form below..
ပါတယ္။ဘယ္လိုလုပ္ေဆာင္ရမလည္းဆိုတာကိုေအာက္အဆင့္ဆင့္ေသခ်ာၾကည့္ျပီးလုပ္ေဆာင္သြားပါ။
Important Note:
"The firmware is released only for the Samsung Galaxy S4 GT-I9515 model, so don't try this in any other android device.
Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Pre-Requisites:
Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage
Install USB driver for your device on your computer
1- Download Android 4.4.2 XXU1ANC1 Firmware for Galaxy S4 I9515 from the above list
2- Download Odin 3.09
3- Switch off your phone and boot Galaxy S4 I9515 into Download Mode by pressing and holding the
Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to
Download Mode.
4- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator
(Right click on the .exe file and click on Run as administrator)
5- Now connect your Galaxy S4 I9515 to your computer via USB cable
6- In Odin3 screen, you should see a COM Port number like :[COM7] at ID:COM section and Added! text at the message box.
This means your device has been detected by Odin3.
7- Make sure that, only the Auto Reboot and F. Reset Time options are checked.
8- Now, extract the downloaded firmware zip file, you find a firmware file with extension .tar.md5
9- In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension
(The firmware file look something like: I9515XXDLJ5_I9515ODDDLI7_INU.tar.md5)
10- Now, click on the Start button to begin the installation process, wait few moments.
11- Once completed, you would see PASS! message in ID:COM port having green background
12- Your phone should automatically reboot after completion
13- You can now disconnect your phone from computer
14- Finish
Congratulations! your Galaxy S4 I9515 is now updated to the latest and official Android 4.4.2 KitKat firmware. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial,then your your Galaxy S4 should now running on the latest Android 4.4.2 KitKat build version XXU1ANC1. You can confirm the firmware update details from Settings-About Phone. If you find any problem with the above tutorial and download link, feel free to contact with us using the comment form below..
က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။
Thank You For Downloading And Dont Forget to Clicking Once on a Ad Banner.
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို ကလစ္ခဲ့ပါခင္ဗ်ာ။
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို ကလစ္ခဲ့ပါခင္ဗ်ာ။
★★နည္းပညာၿမိဳ႕ေတာ္★★