Nay Phyo Kyaw: ★★Firmware Galaxy Note 3 (China/WCDMA)SM-N9006 to N9006ZNUENC2 Android 4.4.2 ★★

Mar 24, 2014

★★Firmware Galaxy Note 3 (China/WCDMA)SM-N9006 to N9006ZNUENC2 Android 4.4.2 ★★

Galaxy Note 3 (China/WCDMA)SM-N9006 အတြက္ N9006ZNUENC2 Android 4.4.2 Firmware
ကိုတင္ေပးလိုက္ပါ။လိုအပ္သူမ်ားေအာက္မွာဆြဲလိုက္ပါ။ဘယ္လိုထည့္သြင္းရတယ္ဆိုတာကိုေအာက္မွာ
ေသခ်ာဖတ္ပါပံုေတြနဲ႔လည္းျပထားပါတယ္။

1- Check battery percentage, your device should have at least 60% battery power
2- Turn on USB Debugging mode, go to Settings-General-Developer Options
(As the Developer options are hidden by default on all Android device running on
Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number
for 7 times to visible the Developer options.) See the image above
3- Backup important data and settings to external storage
4- Install USB driver for your device on your computer

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N9006 via Odin

1- Download Android 4.4.2 ZHUENB5 Firmware for Galaxy Note 3 N9006 from the above list

2- Download Odin 3.09

3- Switch off your phone and boot Galaxy Note 3 N9006 into Download Mode by pressing and
holding the Volume Down+Home+Power buttons (long press until the boot screen appear),
now press Volume Up key to proceed to Download Mode.

4- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator
(Right click on the .exe file and click on Run as administrator)

5- Now connect your Galaxy Note 3 N9006 to your computer via USB cable

6- In Odin3 screen, you should see a COM Port number like [COM7] at ID:COM section and Added!
text at the message box. This means your device has been detected by Odin3.

7- Make sure that, only the Auto Reboot and F. Reset Time options are checked.

8- Now, extract the downloaded firmware zip file, you find a firmware file with extension .tar.md5

9- In Odin screen, click on AP button and select the firmware file with .tar.md5 extension
(The firmware file look something like:N9006ZNUENC2_N9006CHUENC2_N9006ZNUENC2
_HOME.tar.md5)

10- Now, click on the Start button to begin the installation process, wait few moments.

11- Once completed, you would see PASS! message in ID:COM port having green background

12- Your phone should automatically reboot after completion

13- You can now disconnect your phone from computer

14- Finish

က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။